坦克座舱噪声试验研究

通过理论计算与试验分析相结合的方法,确定X型坦克座舱内的主要噪声源为行动部分引起的车体振动激励的噪声,鉴别出了发动机与风扇的噪声基频。在信号分析过程中采用功率谱分析法和相关分析法。     

软件随机黑盒测试的快速覆盖技术

本文提出了求多个测试序列极大距离的算法,该算法对数字电路的测试和软件测试技术是通用的。理论上看,该方法可以弥补随机测试和伪随机测试的缺陷。     

Performance analysis of queue length monitoring of M/G/1 systems

This study investigates the statistical process control application for monitoring queue length data in M/G/1 systems. Specifically, we studied the average run length (ARL) characteristics of two different control charts for detecting changes in system utilization. First, the nL chart monitors the sums of successive queue length samples by subgrouping individual observations with sample size n. Next is the individual chart with a warning zone whose control scheme is specified by two pairs of parameters, (upper control limit, d_u) and (lower control limit, d_l), as proposed by Bhat and Rao (Oper Res 20 (1972) 955–966). We will present approaches to calculate ARL for the two types of control charts using the Markov chain formulation and also investigate the effects of parameters of the control charts to provide useful design guidelines for better performance. Extensive numerical results are included for illustration. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Optimal sample size allocation for tests with multiple levels of stress with extreme value regression

In this article, we discuss the optimal allocation problem in a multiple stress levels life‐testing experiment when an extreme value regression model is used for statistical analysis. We derive the maximum likelihood estimators, the Fisher information, and the asymptotic variance–covariance matrix of the maximum likelihood estimators. Three optimality criteria are defined and the optimal allocation of units for two‐ and k‐stress level situations are determined. We demonstrate the efficiency of the optimal allocation of units in a multiple stress levels life‐testing experiment by using real experimental situations discussed earlier by McCool and Nelson and Meeker. Monte Carlo simulations are used to show that the optimality results hold for small sample sizes as well. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Probabilistic solution and bounds for serial inventory systems with discounted and average costs

We consider the infinite horizon serial inventory system with both average cost and discounted cost criteria. The optimal echelon base‐stock levels are obtained in terms of only probability distributions of leadtime demands. This analysis yields a novel approach for developing bounds and heuristics for optimal inventory control polices. In addition to deriving the known bounds in literature, we develop several new upper bounds for both average cost and discounted cost models. Numerical studies show that the bounds and heuristic are very close to optimal.© 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

石英角速率传感器数字相关检测技术研究

为提高石英角速率传感器(QRS)的测量性能,提出了基于数字相关检测技术的QRS信号解调方案。该方案需将一组互相正交的参考信号作为两个相关器的输入,能够同时分离出QRS敏感信号相对于参考信号的同相分量和正交分量。通过角速度提取算法可由以上分量进一步得到输入角速度。分析了实现参考通道功能的两种方法:锁相环(PLL)和Hilbert变换,通过对这两种方法的对比得知,PLL更适合作为QRS相关检测的参考通道。     

小波相关特征尺度熵在滚动轴承故障诊断中的应用

将小波相关滤波方法与Shannon信息熵相结合,提出了一种故障检测与诊断的方法——小波相关特征尺度熵故障法。首先利用小波相关滤波方法提取滚动轴承故障振动信号的微弱故障信息特征,以求得信噪比较高的尺度域小波系数;然后结合Shannon信息熵理论给出了沿尺度分布的小波相关特征尺度熵定义及其计算方法。小波相关特征尺度熵能够定量表征不同尺度的能量分布,各尺度能量分布的均匀性可以反映滚动轴承的运行状态的差别,选取最能反映故障特征的小波相关特征尺度熵作为特征参数,通过所选取的小波相关特征尺度熵大小判断滚动轴承的工作状态和故障类型。实验证明该方法能有效地判断滚动轴承故障特征,为滚动轴承故障诊断提供了新的思路。     

对辐射源信号到达角的自适应跟踪估计

为提高信号到达角(AOA)的测量精度,采用修正的窗函数加权平均算法和基于机动加速度的非零均值时间相关模型的自适应卡尔曼滤波算法,将信号到达角的变化轨迹看作是一种做加速度机动的运动,实现对连续变化信号到达角的参数估计.计算机仿真验证了算法的有效性和可行性,证明该方法有一定的应用价值.     

基于支持向量机的彩色图像恢复新方法

引起图像退化的因素众多,因而难以用一个统一的方法来进行恢复处理。鉴于图像的像素和各颜色分量通道间本质上存在某种相关性,以及以支持向量机为核心的统计学习理论具有较好地解决小样本、非线性、高维数问题的能力,提出了一种新的空域图像恢复方法,并通过对来自于待处理图像本身的训练样本的学习,构造自适应的回归插值函数;然后基于该函数对图像作有选择的修改,从而达到图像恢复的目的。实验表明,该方法是有效的,并且具有较好的泛化性能。     

飞艇浮升力随高度变化规律的研究

针对软式飞艇,在确定压力高度和囊体体积的条件下,对其所受的浮升力随高度变化规律进行了理论分析和仿真计算,给出了飞艇囊体体积设计、压力高度的确定与总浮升力和静浮升力各参数之间的数值变化关系,为飞艇的总体设计提供了理论基础。